Location:

What's the difference between a bathroom faucet and a kitchen faucet?

Date:2019-08-19 08:40:04 Clicks:1252

Why do you want to sell bathroom faucets and kitchen faucets separately? They are classified on the market. What's the difference?

The faucet is divided into single-hole and double-hole (several holes are punched on the installed table), and single-hole is divided into double-temperature (hot and cold water) and single-cold (only cold water).

The basic functions of kitchen faucets and bathroom faucets are the same. However, the kitchen faucet is generally single-hole for easy operation, the tap outlet handle is relatively high, generally arc-shaped cylinder.

The bathroom tap has various styles.

You can go to the shop of the faucet and see it clearly. Very few people put the kitchen faucet in the bathroom or the bathroom faucet in the kitchen, because the faucet of the bathroom is usually a relatively low outlet, there is no need to be as high as the kitchen faucet, and the water handle can be moved left and right.

Simply identify the quality of faucets into the building materials city, light can be distinguished by various faucets can be said to be "gradually attractive eyes". Most consumers are not experts in this field. It's not easy to pick out the right family from this huge "leading battle". Nizun Hardware specially sums up the following purchase principles according to the needs of consumers. As long as you master the following principles, you can basically choose a faucet suitable for you: because most households have installed water heaters at present, the cold-hot mixing faucet is more practical. Generally, the faucet is chrome plated on the surface, and also chrome plated with gold and white porcelain. Chromium alloy is the most popular, but the price is also high. 1. When selecting the appearance, the qualified standard should be bright without bubbles, defects and scratches. Common faucets have only 10 microns of coating, the purpose is to prevent rust, beautiful, and ensure the service life. Some experts revealed that fingerprints quickly dispersed when they were selected by pressing the surface of the tap with their fingers, indicating that the coating was good; the more the fingerprints printed, the worse the printing. After the appearance is selected, you should also try the handle of the tap, whether the switch is smooth, the water temperature can be regulated steadily with large switching amplitude, generally up and down to 30 degrees, and about 90 degrees is the best. But one thing to note is that a light tap does not mean a good feel. 2. At present, the faucets on the market are generally divided into two styles: single-handle faucets and double-handle faucets. Single-handle faucets only use one hole, while double-handle faucets can be divided into four-inch and eight-inch holes. This can be determined by the style of the purchasing table basin. Facebasin faucet and kitchen faucet are generally installed on the table, so its intake pipe can be hard pipe and hose, the length is generally about 35 centimeters. In order to facilitate the connection, a valve must be installed at the joint of domestic water pipe and intake pipe of faucet. This valve is called triangular valve, and tens of millions of water taps are purchased at the same time. Don't forget to match it together, or you'll run again, and the triangle valve has different sizes, depending on the size of the tap intake pipe you buy, there are usually three and four points. In addition, it should be noted that when installing triangular valves, do not install too low, in order to avoid the tap intake pipe is not long enough to connect, and cause unnecessary trouble, generally installed in about 50 to 60 cm away from the ground. Another thing is to buy the tap must not forget to count the spare parts, otherwise it is more troublesome to take them back and install them. Generally, the fittings of the faucet of the basin mainly include dewaterer, lifting rod, fixing bolt of the faucet, fixing copper sheet and gasket, and the faucet of the bathtub also needs standard fittings such as flower sprinkler, two water intake hoses and brackets. The mixing faucets manufactured by regular enterprises have installation dimension drawings and operation instructions when they leave the factory. Attention should be paid to the selection of mixing faucets. Imports should be more careful. 3. After choosing the material and style, we should know the fabrication material of the faucet. At present, most of the types of built-in valve cores of hot water faucets in the market are steel ball valves and ceramic valves. Steel ball valves, with their solid and durable steel balls and strong pressure resistance, have become the leader of the new generation of valve cores. The disadvantage is the rubber ring which plays a sealing role. It's wearable and will soon age. The ceramic valve itself has good sealing performance, and the faucet with ceramic spool feel more comfortable and smooth. The faucet is made of stainless steel. The stainless steel has acid and alkali resistance and does not release harmful substances.

400-0852-508

Copyright © Cixi Xinghong Electrical Appliance Co., Ltd., All Rights Reserved